The Hilly B aircraft was designed by Steve Holland with the idea of putting fun back into building and flying. The laser cut kit provides the basis to create the air frame and then to customise it to a unique HillyB of your own. The build is a simple process and ideal for those that have never built before with laser cut parts and some balsa sheeting to do, the Hilly B is in the air in no time.
HillyB Stats
- Wingspan 900mm
- Length 660mm
- 3 Channel Rudder, Elevator and Throttle
- Servos – 9 gram servos (Hitec HS65) are perfect fit into the precut servo holes
- Power plant is based on a Wot4 Foam-e motor or quantum 20 and ESC of 40A or similar.
- Centre of Gravity should be balanced on the main wing spar and then adjusted as per your flying / handling choice
- Use 3″ Foam wheels https://www.rcworld.co.uk/acatalog/76mm-Sponge-Wheels-White-Hub—3—Pk2–5507045.html
Hilly B Wing – Note the placement of the doublers in front of the spar joint and also one on top at the rear joint. Please dont leave these out of the build.
