Engine Accessories

Made of strong and sturdy metal, this engine stand can accommodate a wide engine range.

Installation is simple enough by firmly attaching the stand to a work bench or solid surface before test running your new engine.

A high power electric starter with modern styling this performs as good as it looks. Instant 12v power is delivered to the starter cone from the positive on/ off switch. Comes with

heavy duty clips, a reversible colour matched rubber cup for engines with or without spinners.

Suitable for the majority of starters, can be reversed for prop or safety nut starting.

Silicone exhaust deflector for engines 20-40 with a 45 degree angle

Silicone exhaust deflector for engines 35-90 with a 45 degree angle

Silicone exhaust deflector for engines 35-90 with a 90 degree angle

This is a handy device use to plug the exhaust outlet

With small O-ring mounted diameter is 11mm

With large O-ring mounted diameter is 13.3mm

This is a handy device use to plug the exhaust outlet

With small O-ring mounted diameter is 11mm

With large O-ring mounted diameter is 13.3mm

This is a handy device use to plug the exhaust outlet

With small O-ring mounted diameter is 11mm

With large O-ring mounted diameter is 13.3mm

These pressure nipples are Ideal for replacing a lost nipple or for adding a pressure line to a pipe or header.

These pressure nipples are Ideal for replacing a lost nipple or for adding a pressure line to a pipe

These pressure nipples are ideal for replacing a lost nipple or for adding a pressure line to a pipe or header

Silicone tube in 150mm length by 11mm inside dia

Ultra high temperature 350c metal loaded silicone tube for joints in engine exhaust systems.

Silicone tube in 150mm length by 15mm inside dia

Ultra high temperature 350c metal loaded silicone tube for joints in engine exhaust systems.

Silicone tube in 150mm length by 19mm inside dia

Ultra high temperature 350c metal loaded silicone tube for joints in engine exhaust systems.

To give additional corrosion protection, add to the model engine after each running session.

It also makes a superb general purpose lubricating oil. Supplied in a spouted 250ml container

This rubber finger guard features a durable, ribbed construction to offer maximum protection and a non-slip flicking surfacel.

Finger guard

Keep your fingers safe with these solid wood handy starter sticks

Aluminium glow start with a meter on the top to display the status of the glow. Comes with a sanyo 1.2v 1800mah cell included.

Designed to fit a standard 2-stroke or 4 stroke, battery spec is 1.2v 1700mAh rechargeable ni-cad. No charger supplied, comes on its own as a spare

1.2v 1800Mah Sanyo Cell, suitable replacement for glowstarts with screw on meter cap.

Height 40mm x 22mm Diameter

New AA Battery Size Glow Start, Gold annodized handle with spring clip method to hold on to glow plug. This unit requires an AA battery

Glowstart combines a locking glow clip designed to fit 2 stroke or 4 stroke plugs.

Comes with a high capacity 1.2volt 2400mAh rechargeable NiCad

Ming Yang peg type glow clip, supplied pre-wired with crocodile clip connectors.

82mm long glow plug clip with banana connectors. Made of a rugged metal construction giving apositive connection to all glow plugs.

Featuring a rugged metal construction, custom designed internal plug grip with a sprung and sliding centre contact, to give a positive connection in all conditions. They are ideal for standard, long or four stroke plugs.

This set features a 2v 4amp lead acid battery, a 2v UK mains charger and a 82mm glow clip.

Details

Remote glow unit for Helicopters and scale installs where access to the main plug is difficult.

Remote glow unit for use where access to the main plug is difficult. Requires a negative lead run from the engine back to the mount unit.

Handy set for remote glow connection unit, ideal for use on scale or any model

Six Socket Sizes 5.5mm, 7.0mm, 8.0mm, 10mm,12mm and 17mm

Four Socket Sizes 5.5mm, 7.0mm, 8.0mm and 10mm

Four Socket Sizes 8.0mm, 9.0mm, 10.0mm and 12.0mm

Ideal for narrow engine head gaps found on fourstrokes and helicopter set ups